Monday, September 12, 2011

Bangkok Beater

I don't care how many people posted this. I am so inspired by Nakai-San and his artwork that I have to post this.

Making of RWB Bangkok from TennXX on Vimeo.





And I bought a new winter beater!

From Instant Upload


A 1989 Dodge Raider 4x4 with a fuel injected 3.0 V6.

From Instant Upload


From Instant Upload


Definitely the first time RWB and a Dodge Raider were mentioned in one post!

Thursday, September 8, 2011

Rear suspension, RLCAs

Next up was the rear suspension.

First thing i had to do was re-attach the RLCAs using the spindle pin.

From Z3


I expected this to be a monster pain in the ass, but it just hammered right in with a TON of anti-seize.

From Z3


both sides.

From Z3


All done yo!

From Z3


Super pumped.

Getting ready to start re-installing the suspension system.

Can't wait!

Wednesday, September 7, 2011

Back in the game! - Suspension, Wheel Bearings, Rotors

Big thanks to Nick and Bryan for getting me off my ass and back up and working on my Z. Also, big thanks to Zeead for coming over this weekend to help me out. Couldn't have got this done w/o you.

Your builds inspire me yo.

So in case you don't remember I left off having just finished assembling my rear hubs with new wheel bearings and extended lug studs.

From Z3


So next up was the front wheel bearings.

I hammered in the extended studs to the hub.

From Z3


And attached the front brake rotors.

From Z3


I stuffed the wheel bearings in a bag with the grease to lube them up without getting the bearings dirty or getting myself covered in grease.

From Z3


Heavy lubing the races.

From Z3


Install inner bearing and seal. More lube.

From Z3


Then I installed them to the front hubs.

From Z3


From Z3


Then install the outer wheel bearing and more grease.

From Z3


Torque down the castle nut and hammer in the cotter pin. Bang the grease cap on and you're done.

Here is a pic with the spring and strut cartridge installed.

From Z3


From Z3


More to come.
Time for bed!